{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Setting angle κ: 90
- Milling application: Ramping; Circular milling; Plunging
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 80 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Ramping; Circular milling; Plunging | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 27 mm | |
| ⌀ D3 | 70 mm | |
| Circular interpolation milling ⌀ Dmin | 150 mm | |
| Circular interpolation milling ⌀ Dmax | 158 mm | |
| Circular interpolation milling ap | 7,6 mm | |
| Ramping angle αmax | 1,27 degrees | |
| Ramping length L for αmax | 67,56 mm | |
| suitable indexable insert | ZDHT 1505 | |
| Pack of insert screws | 219878 5 (15IP) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 211759 80/5 | |
| EAN / GTIN | 4062406681845 | |
| Manufacturer number | 211759 80/5 |
Description
Version:
High-performance milling system for high cutting speeds. Absolutely precise insert bedding. Exceptional torsional stiffness thanks to optimised protection against centrifugal force.
Attention:
Before using the indexable insert No. 211776 ALU (r = 5.0 mm) and 211777 ALU (r = 6.0 mm), the insert seats of the carrier must be modified.