{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide torus cutter R1 0.3 1,2X20 mm
Article no.: 209726 1,2X20
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Tolerance nominal ⌀: 0 / −0.005
- No. of teeth Z: 2
- Helix angle: 30
Product details
Technical Data
| Cutting edge ⌀ DC | 1,2 mm | |
| Coating | Diamond | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Tolerance nominal ⌀ | 0 / −0.005 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h5 | |
| Through-coolant | no | |
| Flute length Lc | 1,2 mm | |
| Corner radius R1 | 0,3 mm | |
| Overhang length L1 incl. recess | 20 mm | |
| Recess ⌀ D1 | 1,14 mm | |
| Overall length L | 60 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed fz for side milling in graphite | 0,025 mm | |
| Feed fz for copy milling in graphite | 0,025 mm | |
| Correction factor ap corr | 0,12 | |
| Colour ring | black | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 209726 1,2X20 | |
| EAN / GTIN | 4045197919045 | |
| Manufacturer number | 209726 1,2X20 |
Application Table
N
200
N
190
N
170
N
150
N
180
N
160
N
350
N
190
N
190
N
340
N
Description
Version:
With crystalline diamond sp3 coating. For the highest demands regarding performance and precision in fibre-reinforced composites, CRP, GRP, and graphite. Extremely tight tolerances ensure maximum accuracy. Double relief ground with 2 hollow-ground chamfers. Recess angle α = 16°.
Tolerances:
Tolerances:
- Corner radius: R1 = ±0.0025 mm
- Neck ⌀: D1 = 0 / -0.01 mm
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
copying: ap = 0.10×D×ap korr
side milling: ap = 0.20×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Values for:
copying: ap = 0.10×D×ap korr
side milling: ap = 0.20×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z