{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter Composite, compacting cut, uncoated, ⌀ h10 DC: 6Mmm
Article no.: 209542 6M
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Tolerance nominal ⌀: h10
- No. of teeth Z: 8
- Helix angle: 8
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 8 | |
| Helix angle | 8 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 21 mm | |
| Overhang length L1 incl. recess | 27 mm | |
| Recess ⌀ D1 | 5,8 mm | |
| Overall length L | 65 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0,12 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in GRP CRP | 0,026 mm | |
| Colour ring | black | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 209542 6M | |
| EAN / GTIN | 4062406366155 | |
| Manufacturer number | 209542 6M |
Application Table
N
80
N
80
N
80
N
80
N
80
N
80
N
165
N
120
N
120
N
180
N
Description
Version:
Tool cutting edge has been specifically developed further for optimal machining of composite materials.
Overall length similar to DIN 6527 long.
Left-hand helix, compacting cut. The material is pushed down on to the substrate. Highly suitable for thin materials.
Overall length similar to DIN 6527 long.
Left-hand helix, compacting cut. The material is pushed down on to the substrate. Highly suitable for thin materials.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter Composite, compacting cut, uncoated, ⌀ h10 DC: 6Mmm
on request
In stock
22 pieces in stock
127,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
68 pieces in stock
51,41 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
181 pieces in stock
51,41 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
228 pieces in stock
58,19 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
245 pieces in stock
58,19 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
475 pieces in stock
35,42 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
17 pieces in stock
216,78 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
216,78 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
127,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
58,19 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 degrees | 45 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees | 45 degrees | 45 degrees | 45 degrees | 90 degrees |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D | Full slot cutting depth 1×D | Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
| Through-coolant | no | no | no | no | no | no | no | no | no | no |
| Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 | DIN 6527 | DIN 6527 | Manufacturer’s standard |
| Cutting edge ⌀ DC | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |