{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill 4 mm GARANT
Article no.: 209320 4
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 20 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | no | |
| Flute length Lc | 13 mm | |
| Overhang length L1 incl. recess | 16 mm | |
| Recess ⌀ D1 | 3,8 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 4 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in PMMA | 0,015 mm | |
| Feed fz for side milling in PMMA | 0,02 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 209320 4 | |
| EAN / GTIN | 4045197478702 | |
| Manufacturer number | 209320 4 |
Application Table
N
180
N
140
N
105
N
190
N
140
N
160
N
140
N
120
N
180
N
150
N
180
Description
Version:
Special geometry for machining aluminium and plastics.
Application:
Extremely sharp cutting edges, especially for machining plastics.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide slot drill 4 mm GARANT
on request
In stock
164 pieces in stock
67,39 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
205 pieces in stock
78,66 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
381 pieces in stock
18,17 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
133 pieces in stock
67,39 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0,25×D ved beskæring | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling |
| Shank | DIN 6535 HA with h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA with h6 |
| Cutting edge ⌀ DC | 4 mm | 4 mm | 4 mm | 4 mm |
| Tolerance nominal ⌀ | e8 | e8 | e8 | e8 |
| Type | W | W | N | W |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |