{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide T-slot cutter, semi-roughing 12,5X6 mm
Article no.: 208027 12,5X6
Article code:
- Tool material: Solid carbide
- Standard: DIN 851
- Milling profile: staggered teeth
- Type: NF
- Tolerance nominal ⌀: d11
Product details
Technical Data
| Cutting edge ⌀ DC | 12,5 mm | |
| Flute length Lc | 6 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 851 | |
| Milling profile | staggered teeth | |
| Type | NF | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 6 | |
| Helix angle | 10 degrees | |
| Direction of infeed | horizontal | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| for T-slots DIN 650 | 6 mm | |
| Recess ⌀ D1 | 5 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0,2 mm | |
| Feed fz in steel < 900 N/mm2 | 0,033 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 45 degrees | |
| Colour ring | green | |
| Type of product | Slot milling cutter |
Identification numbers & Classifications
| Article number | 208027 12,5X6 | |
| EAN / GTIN | 4062406397234 | |
| Manufacturer number | 208027 12,5X6 |
Application Table
P
105
P
90
P
90
P
80
P
60
Description
Version:
With new high-performance coating for very long tool life. The sides of the teeth are ground to give clearance and thus cannot jam in the component. With semi-roughing profile.
Note:
For milling T-slots to DIN 650.
Feed at 50 % fz until full engagement.
Successor product to No. 208034.
Feed at 50 % fz until full engagement.
Successor product to No. 208034.