{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide T-slot cutter, TiAlN, ⌀ DC × LC d11 × d11: 12,5X6mm
Article no.: 208026 12,5X6
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: DIN 851
- Milling profile: staggered teeth
- Type: N
- Tolerance nominal ⌀: d11
Product details
Technical Data
| Cutting edge ⌀ DC | 12,5 mm | |
| Flute length Lc | 6 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 851 | |
| Milling profile | staggered teeth | |
| Type | N | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 6 | |
| Helix angle | 10 degrees | |
| Direction of infeed | horizontal | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| for T-slots DIN 650 | 6 mm | |
| Recess ⌀ D1 | 5 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0,2 mm | |
| Feed fz in steel < 900 N/mm2 | 0,033 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 45 degrees | |
| Colour ring | green | |
| Type of product | Slot milling cutter |
Identification & Classification
| Article number |
208026 12,5X6
Copy |
|
| EAN / GTIN |
4062406397166
Copy |
|
| Manufacturer number |
208026 12,5X6
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
P
ISO code:
105
suitable for / [m/min]
P
ISO code:
90
suitable for / [m/min]
P
ISO code:
90
suitable for / [m/min]
P
ISO code:
80
suitable for / [m/min]
P
ISO code:
60
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
With new high-performance coating for very long tool life. The mill cuts on all three sides. Due to alternate set teeth (staggered).
Note:
Suitable for milling T-slots according to DIN 650.
Feed at 50 % fz until full engagement.
Successor product to No. 208032.
Feed at 50 % fz until full engagement.
Successor product to No. 208032.