{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide ball-nosed slot drill HPC TiAlN 6 mm GARANT
Article no.: 207362 6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: f8
- No. of teeth Z: 2
Product details
Technical Data
| Series | Diabolo | |
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.2×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 10 mm | |
| Radius R | 3 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in steel < 65 HRC | 0,048 mm | |
| Feed fz for copy milling in steel < 65 HRC | 0,048 mm | |
| Colour ring | red | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207362 6 | |
| EAN / GTIN | 4045197600134 | |
| Manufacturer number | 207362 6 |
Application Table
P
200
H
190
H
170
H
150
H
110
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining.
Tolerance: Radius contour = ±0.005 mm.
Special geometry, coating and carbide for hard machining.
Tolerance: Radius contour = ±0.005 mm.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide ball-nosed slot drill HPC TiAlN 6 mm GARANT
on request
In stock
78 pieces in stock
90,16 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
322 pieces in stock
33,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
264 pieces in stock
84,18 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
440 pieces in stock
32,32 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | 0.2×D for side milling ;0.05×D for copy milling | 0.5×D for side milling ;0.05×D for copy milling | 0.5×D for side milling ;0.03×D for copy milling | Full slot cutting depth 1×D ;0.05×D for copy milling |
| Colour ring | red | without | without | without |
| Overall length L | 100 | 100 | 100 | 100 |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Radius R | 3 | 3 | 3 | 3 |
| Helix angle | 30 | 30 | 30 | 30 |
| No. of teeth Z | 2 | 2 | 2 | 2 |