{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide ball nose slot drill TiAlN 2 mm HOLEX
Article no.: 207125 2
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 2 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 5 mm | |
| Radius R | 1 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,011 mm | |
| Feed fz for copy milling in steel < 900 N/mm2 | 0,013 mm | |
| Colour ring | without | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207125 2 | |
| EAN / GTIN | 4045197126320 | |
| Manufacturer number | 207125 2 |
Application Table
N
350
N
250
P
160
P
140
P
130
P
80
P
70
H
50
M
80
M
70
K
120
N
320
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide ball nose slot drill TiAlN 2 mm HOLEX
on request
In stock
4.877 pieces in stock
21,05 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
144 pieces in stock
32,09 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
306 pieces in stock
45,08 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
91 pieces in stock
158,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
268 pieces in stock
158,70 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | 0.05×D for copy milling ;0.05×D for side milling | 0.05×D for copy milling ;0.05×D for side milling | 0.05×D for copy milling ;0.05×D for side milling | 0.03×D for copy milling | 0.03×D for copy milling |
| Through-coolant | no | no | no | no | no |
| Radius R | 1 | 1 | 1 | 1 | 1 |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h5 | DIN 6535 HA to h5 |
| Type | N | N | N | H | H |
| Shank ⌀ Ds | 6 | 6 | 6 | 6 | 6 |
| Type of product | Ball-nosed slot drill | Ball-nosed slot drill | Ball-nosed slot drill | Ball-nosed slot drill | Ball-nosed slot drill |