{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide copy slot drill, DLC, ⌀ DC × L1: 1X10mm
Article no.: 207025 1X10
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: 0 / −0.005
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 1 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | 0 / −0.005 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h5 | |
| Through-coolant | no | |
| Flute length Lc | 0,8 mm | |
| Corner radius R1 | 0,5 mm | |
| Overhang length L1 incl. recess | 10 mm | |
| Recess ⌀ D1 | 0,96 mm | |
| Overall length L | 55 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for copy milling in cast aluminium | 0,036 mm | |
| Correction factor ap corr | 0,5 | |
| Colour ring | yellow | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207025 1X10 | |
| EAN / GTIN | 4062406386870 | |
| Manufacturer number | 207025 1X10 |
Application Table
N
480
N
440
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
With advanced DLC sp2 coating. For the highest demands regarding performance and precision in aluminium materials. Extremely tight tolerances ensure maximum accuracy. Double-relief ground with 2 chamfers.
Tolerances:
Recess angle α = 16°.
Extra-sturdy shank to reduce the tendency to vibrate.
Tolerances:
- Corner radius: Radius contour = 0 / -0.005 mm.
- Neck ⌀: D1 = 0 / -0.01 mm.
Recess angle α = 16°.
Extra-sturdy shank to reduce the tendency to vibrate.
Note:
At greater tool overhang lengths, use a reduced value for ap!
values for:
copying: ap = 0.25×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z
values for:
copying: ap = 0.25×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z