{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 20 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Milling profile | WR | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 60 mm | |
Overhang length L1 incl. recess | 74 mm | |
Recess ⌀ D1 | 19 mm | |
Overall length L | 126 mm | |
Shank ⌀ Ds | 20 mm | |
Corner rounding rv | 0,5 mm | |
Feed fz for slot milling in short-chipping aluminium | 0,25 mm | |
Feed fz for side milling in short-chipping aluminium | 0,28 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 205270 20 | |
EAN / GTIN | 4062406122683 | |
Manufacturer number | 205270 20 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Solid carbide roughing end mill HPC, uncoated, ⌀ e8 DC: 20mm
on request
In stock
30 pieces in stock
305,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
85 pieces in stock
525,55 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
51 pieces in stock
451,95 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
76 pieces in stock
457,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
474,95 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
550,85 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
550,85 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D | 0.5×D for side milling; Full slot cutting depth 1×D; 0.2×D | 0.3×D for side milling; 0.5×D for side milling |
Through-coolant | no | no | yes | yes | yes | yes | yes |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HB to h6 |
Feed fz for side milling in short-chipping aluminium | 0,28 mm | 0,28 mm | 0,22 mm | 0,28 mm | 0,22 mm | 0,28 mm | 0,28 mm |
Feed fz for slot milling in short-chipping aluminium | 0,25 mm | 0,25 mm | 0,18 mm | 0,25 mm | 0,2 mm | 0,25 mm | 0,25 mm |
No. of teeth Z | 3 | 4 | 3 | 4 | 3 | 4 | 4 |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |