{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel solid carbide finishing cutter HPC 8 mm
Article no.: 204015 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 7
Product details
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 7 | |
| Helix angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.1×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 24 mm | |
| Overall length L | 68 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,058 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 204015 8 | |
| EAN / GTIN | 4045197954503 | |
| Manufacturer number | 204015 8 |
Application Table
P
360
P
340
P
300
P
290
P
200
M
130
M
120
S
100
K
300
Description
Version:
For finishing operations.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.
Suitable for machining titanium and titanium alloys.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.
Suitable for machining titanium and titanium alloys.
Note:
Can be reground from ⌀ DC = 6 mm.
ae max = 0.1×D
ae max = 0.1×D
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
GARANT Master Steel solid carbide finishing cutter HPC 8 mm
on request
In stock
164 pieces in stock
100,74 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
109 pieces in stock
38,64 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
228 pieces in stock
104,88 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
95,22 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Colour ring | green | without | yellow | yellow |
| Cutting edge ⌀ DC | 8 mm | 8 mm | 8 mm | 8 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Tolerance nominal ⌀ | f8 | h10 | h6 | h6 |
| Direction of infeed | horizontal | horizontal | horizontal | horizontal |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |