{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro Steel solid carbide finishing cutter HPC 5 mm
Article no.: 203623 5
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: 0 / -0.03
- No. of teeth Z: 6
Product details
Technical Data
| Series | Pro Steel | |
| Cutting edge ⌀ DC | 5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | 0 / -0.03 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.1×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 17 mm | |
| Overall length L | 62 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0,05 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,032 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203623 5 | |
| EAN / GTIN | 4062406252014 | |
| Manufacturer number | 203623 5 |
Application Table
P
160
P
140
P
120
P
110
P
100
H
70
M
90
M
70
Description
Version:
For finishing operations. Special geometry for optimum chip evacuation. For profile milling as a finishing operation. Very sturdy version with strengthened core.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
HOLEX Pro Steel solid carbide finishing cutter HPC 5 mm
on request
In stock
80 pieces in stock
43,59 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
76 pieces in stock
76,36 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN |
| Cutting edge ⌀ DC | 5 mm | 5 mm |
| Tool material | Solid carbide | Solid carbide |
| Tolerance nominal ⌀ | 0 / -0.03 | f8 |
| Feed fz for side milling in steel < 900 N/mm2 | 0,032 mm | 0,028 mm |
| Corner chamfer width at 45° | 0,05 mm | 0,05 mm |
| Shank ⌀ Ds | 6 mm | 6 mm |