{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill TiAlN 16 mm HOLEX
Article no.: 203620 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 66 mm | |
| Overall length L | 130 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,089 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203620 16 | |
| EAN / GTIN | 4045197200518 | |
| Manufacturer number | 203620 16 |
Application Table
P
120
P
110
P
100
P
90
P
80
H
60
H
50
Description
Version:
For finishing operations. Special geometry for optimum chip evacuation. For profile milling as a finishing operation. Very sturdy version with strengthened core.
Application:
Very suitable for large depths of cut.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide end mill TiAlN 16 mm HOLEX
on request
In stock
228 pieces in stock
173,08 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
608,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
33 pieces in stock
144,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 130 mm | 150 mm | 82 mm |
| Through-coolant | no | no | no |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Flute length Lc | 66 mm | 85 mm | 22 mm |
| Feed fz for side milling in steel < 900 N/mm2 | 0,089 mm | 0,08 mm | 0,089 mm |
| Direction of infeed | horizontal | horizontal | horizontal |
| Shank ⌀ Ds | 16 mm | 16 mm | 16 mm |