{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 5 mm
Article no.: 203619 5
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 18 mm | |
| Overall length L | 62 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,032 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203619 5 | |
| EAN / GTIN | 4045197958860 | |
| Manufacturer number | 203619 5 |
Application Table
P
120
P
110
P
100
P
90
P
80
H
60
H
50
Description
Version:
For finishing operations. Special geometry for optimum chip evacuation. For profile milling as a finishing operation. Very sturdy version with strengthened core.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide milling cutter 5 mm
on request
In stock
69 pieces in stock
31,97 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
105 pieces in stock
33,47 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
76,36 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
64 pieces in stock
25,99 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
28,98 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Overall length L | 62 mm | 70 mm | 62 mm | 54 mm | 57 mm |
| Through-coolant | no | no | no | no | no |
| Cutting edge ⌀ DC | 5 mm | 5 mm | 5 mm | 5 mm | 5 mm |
| No. of teeth Z | 6 | 6 | 7 | 6 | 6 |
| Direction of infeed | horizontal | horizontal | horizontal | horizontal | horizontal |