{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill HPC TiAlN 12 mm GARANT
Article no.: 203372 12
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: e8
- No. of teeth Z: 6
Product details
Technical Data
| Series | Diabolo | |
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 6 | |
| Helix angle | 50 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 45 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 65 HRC | 0,021 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification & Classification
| Article number |
203372 12
Copy |
|
| EAN / GTIN |
4045197597564
Copy |
|
| Manufacturer number |
203372 12
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
P
ISO code:
120
suitable for / [m/min]
H
ISO code:
115
suitable for / [m/min]
H
ISO code:
100
suitable for / [m/min]
H
ISO code:
90
suitable for / [m/min]
H
ISO code:
60
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide, specially for hard machining.
Special geometry, coating and carbide, specially for hard machining.
Application:
For profile milling as finishing.
(Plunge cutting only to shallow depths).
(Plunge cutting only to shallow depths).