{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 8 mm
Article no.: 203248 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / -0.02
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / -0.02 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 24 mm | |
| Overall length L | 68 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0,08 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 55 HRC | 0,03 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203248 8 | |
| EAN / GTIN | 4062406253813 | |
| Manufacturer number | 203248 8 |
Application Table
P
160
P
95
P
85
H
75
H
65
H
50
H
30
Description
Version:
Strengthened core and geometry for hard machining, without dynamic helical pitch.
Tolerance: Size nominal ⌀ Dc 0/-0.02 mm.
Application:
For profile milling as finishing.
(Plunge cutting only to shallow depths).
(Plunge cutting only to shallow depths).
Note:
Successor product to No. 203320.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide milling cutter 8 mm
on request
In stock
106 pieces in stock
37,84 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
114 pieces in stock
147,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
322 pieces in stock
76,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
107 pieces in stock
36,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
134 pieces in stock
93,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Darbinis plotis ae frezuojant | 0.05×D for side milling | 0,05×D, kai apdirbami šoniniai paviršiai | 0,05×D apdirbant šoninius paviršius | 0,05×D apdirbant šoninius paviršius | 0,05×D apdirbant šoninius paviršius |
| Bendras ilgis L | 68 | 64 | 70 | 68 | 100 |
| Norma | Manufacturer’s standard | Gamykliniai standartai | Gamykliniai standartai | Gamykliniai standartai | Gamykliniai standartai |
| Tipas | H | H | H | H | H |
| Dantų skaičius Z | 6 | 6 | 6 | 6 | 6 |
| Koto ⌀ Ds | 8 | 8 | 8 | 8 | 8 |
| Produkto rūšis | End / face mill | Frezos skirtos griovelių ir paviršių apdirbimui | Frezos skirtos griovelių ir paviršių apdirbimui | Frezos skirtos griovelių ir paviršių apdirbimui | Frezos skirtos griovelių ir paviršių apdirbimui |