ProSteel solid carbide roughing end mill HPC TiAlN 16 mm HOLEX

Article no.: 203056 16

plus VAT at the current rate Prices plus delivery costs

⌀ D_C (mm):

Do you want to order more than one article? To quick entry

Quantity

on request

In stock

802 pieces in stock

Product details

Series		Pro Steel
Cutting edge ⌀ D_C		16 mm
Coating		TiAlN
Tool material		Solid carbide
Standard		Manufacturer’s standard
Type		N
Tolerance nominal ⌀		0 / -0.03
No. of teeth Z		4
Helix angle		38 degrees
Spacing of the cutters		unequal spacing
Direction of infeed		horizontal, oblique and vertical
Cutting width a_e for milling operation		Full slot cutting depth 1×D; 0.25×D for side milling
Shank		DIN 6535 HB to h6
Through-coolant		no
Machining strategy		HPC
Flute length L_c		32 mm
Overhang length L₁ incl. recess		56 mm
Recess ⌀ D₁		15,5 mm
Overall length L		108 mm
Shank ⌀ D_s		16 mm
Corner chamfer width at 45°		0,4 mm
Corner chamfer angle		45 degrees
Feed f_z for slot milling in steel < 900 N/mm²		0,08 mm
Feed f_z for side milling in steel < 900 N/mm²		0,1 mm
Colour ring		green
Type of product		End / face mill

260

240

180

160

250

For roughing and finishing.
Up to 0.7×D into solid material at very high feed rates with smooth cutting action.

Optimised flute form, eccentric relief ground, wide chip space.

Compare with similar products

	This article	Recommendations
	ProSteel solid carbide roughing end mill HPC TiAlN 16 mm HOLEX on request In stock 802 pieces in stock 152,95 € plus VAT at the current rate Prices plus delivery costs	HOLEX Pro Steel solid carbide roughing end mill HPC 16 mm on request In stock 540 pieces in stock 127,65 € plus VAT at the current rate Prices plus delivery costs	HOLEX Pro Steel solid carbide roughing end mill HPC 16 mm on request In stock 159 pieces in stock 163,88 € plus VAT at the current rate Prices plus delivery costs	GARANT Master INOX solid carbide milling cutter HPC 16 mm on request In stock 31 pieces in stock 254,15 € plus VAT at the current rate Prices plus delivery costs	Solid carbide milling cutter HPC 16 mm on request In stock 281 pieces in stock 269,10 € plus VAT at the current rate Prices plus delivery costs	GARANT Master INOX solid carbide milling cutter with chip separators TPC 16 mm on request In stock 244 pieces in stock 242,65 € plus VAT at the current rate Prices plus delivery costs
Corner chamfer angle	45 degrees	45 degrees	45 degrees	45 degrees	45 degrees	45 degrees
Overall length L	108 mm	92 mm	108 mm	108 mm	150 mm	92 mm
Through-coolant	no	no	no	no	no	no
Standard	Manufacturer’s standard	Manufacturer’s standard	Manufacturer’s standard	Manufacturer’s standard	Manufacturer’s standard	Manufacturer’s standard
Cutting edge ⌀ D_C	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm
Type	N	N	N	N	N	N
Shank ⌀ D_s	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm