{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill TiAlN 20 mm HOLEX
Article no.: 202760 20
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: h10
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 41 mm | |
| Overall length L | 104 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank form | HB | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0,1 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,12 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202760 20 | |
| EAN / GTIN | 4045197197801 | |
| Manufacturer number | 202760 20 |
Application Table
N
280
P
100
P
70
P
60
H
35
M
80
M
60
K
90
Description
Version:
Eccentric relief ground.
Without 45° cutting edge chamfer.
Without 45° cutting edge chamfer.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide end mill TiAlN 20 mm HOLEX
on request
In stock
575 pieces in stock
152,95 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
51 pieces in stock
322,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
353,05 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
18 pieces in stock
402,50 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | uncoated | DLC |
| Colour ring | without | without | yellow | yellow |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Type | H | H | W | W |
| No. of teeth Z | 4 | 4 | 3 | 3 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm |