{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill TiAlN 3 mm HOLEX
Article no.: 202545 3
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 10 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0,008 mm | |
| Feed fz for side milling in short-chipping aluminium | 0,01 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202545 3 | |
| EAN / GTIN | 4045197117304 | |
| Manufacturer number | 202545 3 |
Application Table
N
300
N
280
N
200
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Extra sharp cutting edges.
Dimensions similar to DIN 6527.
Eccentric relief ground.
Dimensions similar to DIN 6527.
Eccentric relief ground.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide end mill TiAlN 3 mm HOLEX
on request
In stock
193 pieces in stock
36,57 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
125 pieces in stock
42,78 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
62,33 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
444 pieces in stock
63,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
19 pieces in stock
50,83 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
| Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
| Cutting edge ⌀ DC | 3 mm | 3 mm | 3 mm | 3 mm | 3 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Tolerance nominal ⌀ | e8 | h6 | e8 | h6 | h6 |
| Feed fz for slot milling in short-chipping aluminium | 0,008 mm | 0,008 mm | 0,008 mm | 0,04 mm | 0,04 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |