{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel solid carbide mini-milling cutter HPC 10 mm
Article no.: 202297 10
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 16 mm | |
| Overall length L | 66 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0,05 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0,05 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,06 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202297 10 | |
| EAN / GTIN | 4062406272159 | |
| Manufacturer number | 202297 10 |
Application Table
N
290
N
240
P
140
P
120
P
100
P
70
P
50
M
90
M
70
S
40
K
85
Description
Version:
Extra short cutter for maximum stability. Shank length to DIN for improved support of the tool in the holder. This significantly increases the tool life.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Tool for general-purpose machining.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Tool for general-purpose machining.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Master Steel solid carbide mini-milling cutter HPC 10 mm
on request
In stock
27 pieces in stock
52,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
216 pieces in stock
53,82 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 66 | 55 |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Cutting edge ⌀ DC | 10 | 10 |
| Tool material | Solid carbide | Solid carbide |
| Feed fz for slot milling in steel < 900 N/mm2 | 0,05 | 0,05 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Corner chamfer width at 45° | 0,05 | 0,05 |