{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel solid carbide mini-milling cutter HPC 5 mm
Article no.: 202291 5
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Helix angle characteristic | 1 | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 8 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0,025 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,028 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202291 5 | |
| EAN / GTIN | 4062406271589 | |
| Manufacturer number | 202291 5 |
Application Table
N
290
N
240
P
140
P
120
P
100
P
70
P
50
M
90
M
70
S
40
K
85
Description
Version:
Extra short cutter for maximum stability. Shank length to DIN for improved support of the tool in the holder. This significantly increases the tool life.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Tool for general-purpose machining.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Tool for general-purpose machining.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
GARANT Master Steel solid carbide mini-milling cutter HPC 5 mm
on request
In stock
138 pieces in stock
24,73 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
397 pieces in stock
19,09 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
148 pieces in stock
42,55 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
286 pieces in stock
24,15 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
194 pieces in stock
18,17 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | uncoated | AlCrN | uncoated |
| Overall length L | 50 | 39 | 57 | 57 | 57 |
| Through-coolant | no | no | no | no | no |
| Standard | Manufacturer’s standard | Manufacturer’s standard | DIN 6527 | DIN 6527 | DIN 6527 |
| Cutting edge ⌀ DC | 5 | 5 | 5 | 5 | 5 |
| Helix angle | 30 | 30 | 45 | 30 | 45 |
| Shank ⌀ Ds | 6 | 6 | 6 | 6 | 6 |