{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 12 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 26 mm | |
Overhang length L1 incl. recess | 38 mm | |
Recess ⌀ D1 | 11,8 mm | |
Overall length L | 83 mm | |
Shank ⌀ Ds | 12 mm | |
Corner chamfer width at 45° | 0,1 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0,06 mm | |
Feed fz for side milling in steel < 900 N/mm2 | 0,08 mm | |
Correction factor for vc | 1,5 | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 202280 12 | |
EAN / GTIN | 4045197116451 | |
Manufacturer number | 202280 12 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
Solid carbide slot drill DIN 6535 HA TiAlN 12 mm GARANT
on request
In stock
102 pieces in stock
104,19 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
171,93 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
127 pieces in stock
52,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
109 pieces in stock
86,48 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
120,75 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
36 pieces in stock
125,93 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | TiAlN | TiAlN | TiAlN | AlCrN | TiAlN | TiAlN |
Corner chamfer angle | 45 | 45 | 45 | 45 | 45 | 45 |
Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D | Full slot cutting depth 1×D ;0.5×D for side milling |
Colour ring | without | blue | green | without | blue | green |
Through-coolant | no | no | no | no | no | no |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Tolerance nominal ⌀ | e8 | e8 | h10 | e8 | e8 | f8 |