{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 1,1 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
Shank | Parallel shank to h6 | |
Through-coolant | no | |
Flute length Lc | 2 mm | |
Overall length L | 38 mm | |
Shank ⌀ Ds | 3 mm | |
Shank form | HA | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0,005 mm | |
Feed fz for side milling in steel < 750 N/mm2 | 0,006 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 202262 1,1 | |
EAN / GTIN | 4045197863966 | |
Manufacturer number | 202262 1,1 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Solid carbide mini milling cutter, uncoated, ⌀ e8 DC: 1,1mm
on request
In stock
128 pieces in stock
16,16 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
44 pieces in stock
25,53 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
166 pieces in stock
24,15 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
141 pieces in stock
20,76 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
105 pieces in stock
20,76 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
195 pieces in stock
16,16 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
47 pieces in stock
24,73 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | TiAlN | AlCrN | AlCrN | AlCrN | uncoated | TiAlN |
Standard | Manufacturer’s standard | Manufacturer’s standard | DIN 6527 | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
Shank | Parallel shank to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | Parallel shank to h6 | Parallel shank to h6 | Parallel shank to h6 | DIN 6535 HA to h6 |
Cutting edge ⌀ DC | 1,1 mm | 1,1 mm | 1,1 mm | 1,1 mm | 1,1 mm | 1,1 mm | 1,1 mm |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 3 mm | 3 mm | 3 mm | 3 mm | 3 mm | 3 mm | 3 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |