{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mills MTC 25 mm GARANT
Article no.: 202243 25
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 52 mm | |
| Overhang length L1 incl. recess | 62 mm | |
| Recess ⌀ D1 | 24 mm | |
| Overall length L | 121 mm | |
| Shank ⌀ Ds | 25 mm | |
| Shank form | HB | |
| Corner chamfer width at 45° | 0,3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0,085 mm | |
| Feed fz for side milling in short-chipping aluminium | 0,12 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202243 25 | |
| EAN / GTIN | 4045197591241 | |
| Manufacturer number | 202243 25 |
Application Table
N
190
N
150
N
120
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Lengths similar to DIN 6527 long.
Lengths similar to DIN 6527 long.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide end mills MTC 25 mm GARANT
on request
In stock
3 pieces in stock
639,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
41 pieces in stock
487,60 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | TiAlN |
| Colour ring | yellow | without |
| Standard | DIN 6527 | Manufacturer’s standard |
| Tool material | Solid carbide | Solid carbide |
| Type | W | N |
| No. of teeth Z | 3 | 8 |
| Shank ⌀ Ds | 25 | 25 |