{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 3 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 42 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 8 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0,04 mm | |
Feed fz for side milling in short-chipping aluminium | 0,05 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202002 3 | |
EAN / GTIN | 4062406127558 | |
Manufacturer number | 202002 3 |
This article |
Recommendations |
||
---|---|---|---|
GARANT Master Alu PickPocket solid carbide roughing end mill HPC 3 mm
on request
In stock
49 pieces in stock
49,91 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
331 pieces in stock
105,34 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
274 pieces in stock
25,88 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | Full slot cutting depth 1×D ;Full slot cutting depth 1×D | 0.05×D for side milling | 0.1×D for side milling |
Colour ring | yellow | red | without |
Through-coolant | no | no | no |
Tolerance nominal ⌀ | e8 | 0 / -0.02 | h10 |
No. of teeth Z | 3 | 6 | 6 |
Shank ⌀ Ds | 6 | 6 | 6 |
Type of product | End / face mill | End / face mill | End / face mill |