{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill HPC TiAlN 8 mm GARANT
Article no.: 201639 8
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: H
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
Product details
Technical Data
| Series | Diabolo | |
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | H | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 19 mm | |
| Overhang length L1 incl. recess | 27 mm | |
| Recess ⌀ D1 | 7,8 mm | |
| Overall length L | 63 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0,08 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 65 HRC | 0,01 mm | |
| Feed fz for side milling in steel < 65 HRC | 0,016 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201639 8 | |
| EAN / GTIN | 4045197597311 | |
| Manufacturer number | 201639 8 |
Application Table
P
120
H
110
H
80
H
60
H
50
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide specially for hard machining.
New generation of high performance milling cutters in the HPC machining range.
From size 2 with neck recess (dimensions L1 and⌀ D1).
Special geometry, coating and carbide specially for hard machining.
New generation of high performance milling cutters in the HPC machining range.
From size 2 with neck recess (dimensions L1 and⌀ D1).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide slot drill HPC TiAlN 8 mm GARANT
on request
In stock
142 pieces in stock
74,98 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
257 pieces in stock
64,86 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
227 pieces in stock
24,96 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | DLC | TiAlN |
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees |
| Colour ring | red | yellow | green |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Tolerance nominal ⌀ | e8 | e8 | h10 |
| Corner chamfer width at 45° | 0,08 mm | 0,1 mm | 0,1 mm |
| Type of product | End / face mill | End / face mill | End / face mill |