{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 8 mm
Article no.: 201043 8
Article code:
- Tool material: solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: h10
- No. of teeth Z: 1
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | uncoated | |
| Tool material | solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 1 | |
| Helix angle | 26 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 35 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0,03 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201043 8 | |
| EAN / GTIN | 4045197746184 | |
| Manufacturer number | 201043 8 |
Application Table
N
170
N
125
N
100
N
170
N
120
N
140
N
120
N
100
N
170
N
130
N
160
Description
Version:
Large flutes for unobstructed swarf evacuation.
Special geometry for machining aluminium.
Special geometry for machining aluminium.
Application:
Especially for milling aluminium, plunging and contour milling.