{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
MTC roughing end mill SPM TiAlN 20 mm GARANT
Article no.: 192895 20
Article code:
- Tool material: HSS E SPM
- Standard: DIN 844
- Milling profile: HRF
- Tolerance nominal ⌀: k12
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | HSS E SPM | |
| Standard | DIN 844 | |
| Milling profile | HRF | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 5 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 38 mm | |
| Overall length L | 104 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer width at 45° | 0,2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 1100 N/mm2 | 0,065 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192895 20 | |
| EAN / GTIN | 4045197274809 | |
| Manufacturer number | 192895 20 |
Application Table
P
95
P
75
P
75
P
40
P
35
M
25
M
20
S
14
Description
Version:
SPM substrate with very high cobalt content. Combines the hardness of solid carbide with the toughness of PM steel. Dynamic special knuckle profile for roughing.
For use as a universal roughing end mill Centre cutting edge geometry for plunging.
For use as a universal roughing end mill Centre cutting edge geometry for plunging.
Application:
For very high metal removal rates and increased machining volumes. Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
MTC roughing end mill SPM TiAlN 20 mm GARANT
on request
In stock
53 pieces in stock
244,95 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
135,13 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
64 pieces in stock
125,93 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
28 pieces in stock
161,58 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
104 pieces in stock
235,75 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
94 pieces in stock
96,14 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Flute length Lc | 38 mm | 22 mm | 38 mm | 22 mm | 38 mm | 38 mm |
| Machining strategy | MTC | HPC | HPC | HPC | HPC | HPC |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |