{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HPC roughing end mill SPM TiAlN 25 mm GARANT
Article no.: 192855 25
Article code:
- Tool material: HSS E SPM
- Standard: DIN 844
- Milling profile: HRF
- Tolerance nominal ⌀: k12
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Coating | TiAlN | |
| Tool material | HSS E SPM | |
| Standard | DIN 844 | |
| Milling profile | HRF | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 5 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 45 mm | |
| Overall length L | 121 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer width at 45° | 0,3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in stainless steel > 900 N/mm2 | 0,047 mm | |
| Colour ring | blue | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192855 25 | |
| EAN / GTIN | 4045197422910 | |
| Manufacturer number | 192855 25 |
Application Table
N
159
P
95
P
74
P
74
P
42
M
26
M
21
S
20
Description
Version:
Special SPM substrate with very high cobalt content.
Combines the hardness of solid carbide and the toughness of PM steel.
Centre cutting teeth profile for plunging.
Combines the hardness of solid carbide and the toughness of PM steel.
Centre cutting teeth profile for plunging.
Application:
For very high metal removal rates and increased machining volumes on stainless steels.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
HPC roughing end mill SPM TiAlN 25 mm GARANT
on request
In stock
77 pieces in stock
270,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
18 pieces in stock
220,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1 pieces in stock
234,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
257,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
53 pieces in stock
173,65 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Through-coolant | no | no | no | no | no |
| Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
| Tool material | HSS E SPM | HSS E SPM | HSS E SPM | HSS E SPM | HSS E SPM |
| Machining strategy | HPC | HPC | HPC | HPC | HPC |
| Shank ⌀ Ds | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |