{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
3-flute roughing end mill HSS-PM TiAlN 10 mm GARANT
Article no.: 192541 10
Article code:
- Tool material: HSS PM
- Norm: DIN 844 B
- Milling profile: WR
- Tolerance nominal ⌀: js14
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Norm | DIN 844 B | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | js14 | |
| No. of teeth Z | 3 | |
| Helix angle | 36 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 45 mm | |
| Overall length L | 95 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0,5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0,04 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192541 10 | |
| EAN / GTIN | 4045197547538 | |
| Manufacturer number | 192541 10 |
Application Table
N
138
M
23
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
For the most demanding metal removal rates.
Centre cutting teeth for plunging.
- Wide, precision ground chip flutes.
- Special chip angle for aluminium and non-ferrous metals.
For the most demanding metal removal rates.
Advantage:
Suitable for high machining volumes due to the large flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
3-flute roughing end mill HSS-PM TiAlN 10 mm GARANT
on request
In stock
13 pieces in stock
75,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
71 pieces in stock
54,28 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
276 pieces in stock
64,17 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
147 pieces in stock
56,01 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
96 pieces in stock
66,93 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 | 45 | 45 | 45 | 45 |
| Norm | DIN 844 B | DIN 844 B | DIN 844 | DIN 844 | DIN 844 B |
| Cutting edge ⌀ DC | 10 | 10 | 10 | 10 | 10 |
| Tool material | HSS PM | HSS PM | HSS PM | HSS PM | HSS PM |
| No. of teeth Z | 3 | 3 | 5 | 5 | 4 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 10 | 10 | 10 | 10 | 10 |