{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
3-flute roughing end mill HSS-PM 14 mm GARANT
Article no.: 192520 14
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: WR
- Tolerance nominal ⌀: js14
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 14 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | js14 | |
| No. of teeth Z | 3 | |
| Helix angle | 36 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 53 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0,5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0,055 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192520 14 | |
| EAN / GTIN | 4045197106681 | |
| Manufacturer number | 192520 14 |
Application Table
N
138
N
83
M
9
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
Centre cutting teeth for plunging.
- Wide, precision ground chip flutes.
- Special chip angle for aluminium and non-ferrous metals.
Advantage:
Suitable for high machining volumes due to the large flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
3-flute roughing end mill HSS-PM 14 mm GARANT
on request
In stock
81 pieces in stock
83,49 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
84,87 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
81,42 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN |
| Colour ring | yellow | without | without |
| Through-coolant | no | no | no |
| Standard | DIN 844 B | DIN 844 B | DIN 844 B |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm |