{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Semi-roughing end mill 8 mm GARANT
Article no.: 191700 8
Article code:
- Schneidstoff: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NF
- Toleranz Nenn-⌀: k10
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Beschichtung | uncoated | |
| Schneidstoff | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NF | |
| Toleranz Nenn-⌀ | k10 | |
| No. of teeth Z | 3 | |
| Spiralwinkel | 25 degrees | |
| Zustellrichtung | horizontal, oblique and vertical | |
| Schaft | DIN 1835 B to h6 | |
| Innenkühlung | no | |
| Flute length Lc | 38 mm | |
| Overall length L | 88 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0,3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0,016 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 191700 8 | |
| EAN / GTIN | 4045197104595 | |
| Manufacturer number | 191700 8 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
N
83
P
30
P
25
P
25
K
23
N
55
Description
Version:
Relief ground truncated-type roughing profile.
Centre cutting teeth for plunging.
The wide tooth lands can be re-ground frequently without losing the profile.
Universal cutter for profile milling or for plunging.
Centre cutting teeth for plunging.
The wide tooth lands can be re-ground frequently without losing the profile.
Universal cutter for profile milling or for plunging.
Advantage:
Compared to multi−flute cutters, better chip evacuation due to larger flutes.