{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
End mill HSS-Co8 3 mm GARANT
Article no.: 191500 3
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: k10
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 4 | |
| Helix angle | 30-40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 8 mm | |
| Overall length L | 52 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0,005 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191500 3 | |
| EAN / GTIN | 4045197102775 | |
| Manufacturer number | 191500 3 |
Application Table
N
83
P
30
P
25
P
25
K
23
N
55
Description
Version:
Multi-flute end mill. Eccentric relief ground.
Centre cutting edge geometry for plunging.
Centre cutting edge geometry for plunging.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
End mill HSS-Co8 3 mm GARANT
on request
In stock
557 pieces in stock
14,32 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
303 pieces in stock
16,22 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
546 pieces in stock
20,01 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
69 pieces in stock
23,12 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
372 pieces in stock
27,83 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
570 pieces in stock
17,25 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN | uncoated | uncoated | TiAlN |
| Corner chamfer angle | 90 | 90 | 90 | 90 | 90 | 90 |
| Colour ring | without | without | without | without | yellow | without |
| Standard | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B |
| Helix angle | 30-40 | 30 | 30 | 30 | 42 | 30-40 |
| Tolerance nominal ⌀ | k10 | e8 | e8 | e8 | e8 | k10 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |