{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drill HSS-Co8 TiAlN 6,5 mm HOLEX
Article no.: 191070 6,5
Article code:
- Tool material: HSS Co 8
- Standard: DIN 327 D
- Type: N
- Tolerance nominal ⌀: e8
- Number of effective teeth Z (peripheral side): 2
Product details
Technical Data
| Cutting edge ⌀ DC | 6,5 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 327 D | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| Number of effective teeth Z (peripheral side) | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 10 mm | |
| Overall length L | 60 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0,014 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | without | |
| Type of product | Milling cutter |
Identification numbers & Classifications
| Article number | 191070 6,5 | |
| EAN / GTIN | 4045197099808 | |
| Manufacturer number | 191070 6,5 |
Application Table
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Centre cutting edge geometry for plunging.
Economy version.
Economy version.
Application:
For milling keyways (slots) or pockets from the centre of the component.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Slot drill HSS-Co8 TiAlN 6,5 mm HOLEX
on request
In stock
53 pieces in stock
22,08 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
180 pieces in stock
16,27 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
55 pieces in stock
30,25 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 | 90 | 90 |
| Colour ring | without | without | without |
| Cutting edge ⌀ DC | 6,5 | 6,5 | 6,5 |
| Helix angle | 30 | 30 | 30 |
| Feed fz for slot milling in steel < 750 N/mm2 | 0,014 | 0,014 | 0,012 |
| Shank ⌀ Ds | 10 | 10 | 10 |
| Type of product | Milling cutter | Milling cutter | Milling cutter |