{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide machine reamer H7 15 mm GARANT
Article no.: 164500 15
Article code:
- Tolerance: H7
- Tool material: Carbide K10
- Standard: DIN 8093
- Through-coolant: no
- Shank: Parallel shank to h6
Product details
Technical Data
| Nominal ⌀ DC | 15 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | Carbide K10 | |
| Standard | DIN 8093 | |
| Through-coolant | no | |
| Shank | Parallel shank to h6 | |
| Application for type of drilling | for through holes | |
| Flute length Lc | 50 mm | |
| Overhang L1 | 111 mm | |
| Overall length L | 162 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 12,5 mm | |
| Feed f in steel < 1100 N/mm2 | 0,18 mm/rev. | |
| Reaming oversize in diameter | 0,2 mm | |
| Shank tolerance | h9 | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164500 15 | |
| EAN / GTIN | 4045197252135 | |
| Manufacturer number | 164500 15 |
Application Table
N
35
N
30
P
20
P
13
P
10
P
8
P
6
M
10
N
20
Description
Version:
Long flutes, left-hand helix.
Extremely irregular spacing (EU) from size 2.
This ensures that the reamed bore is absolutely round and free from chatter marks.
Extremely irregular spacing (EU) from size 2.
This ensures that the reamed bore is absolutely round and free from chatter marks.
Application:
On stable, low vibration machines. Longer tool life and better dimensional accuracy than HSS reamers.
Tool material:
Sizes 1 − 13 solid carbide.
Sizes 14 − 16 with carbide inserts, supported by hard nitrided steel guidel chamfers.
Sizes 14 − 16 with carbide inserts, supported by hard nitrided steel guidel chamfers.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Carbide machine reamer H7 15 mm GARANT
on request
In stock
17 pieces in stock
156,98 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
77,05 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 6 | 8 |
| Overhang L1 | 111 | 101 |
| Standard | DIN 8093 | DIN 206 B |
| Tool material | Carbide K10 | HSS |
| Tolerance | H7 | H7 |
| Application for type of drilling | for through holes | for through hole |
| Type of product | Phillips bit | Phillips bit |