{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Taper pin hand reamer 1:50 1,2 mm HOLEX
Article no.: 161200 1,2
Copy
Article code:
Copy
- Tool material: HSS
- Standard: DIN 9
- Taper ratio: 1:50
- Through-coolant: no
- Application for type of drilling: for through holes
Product details
Technical Data
| small ⌀ D3 | 1,1 mm | |
| large ⌀ D2 | 1,74 mm | |
| Nominal ⌀ DC | 1,2 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 9 | |
| Taper ratio | 1:50 | |
| Through-coolant | no | |
| Application for type of drilling | for through holes | |
| Flute length Lc | 32 mm | |
| Overall length L | 50 mm | |
| Shank square □ | 2,5 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification & Classification
| Article number |
161200 1,2
Copy |
|
| EAN / GTIN |
4045197088857
Copy |
|
| Manufacturer number |
161200 1,2
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
suitable for / [m/min]
P
ISO code:
suitable for / [m/min]
P
ISO code:
suitable for / [m/min]
P
ISO code:
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Conically increasing cutting edges (1 mm over 50 mm length).
Size1.2 − 2.5 − straight flutes. Form A.
Size3 − 25 − helical flutes. Form B.
Size1.2 − 2.5 − straight flutes. Form A.
Size3 − 25 − helical flutes. Form B.
Application:
For reaming tapered holes by hand for taper pins to ISO 2339 (DIN 1), DIN 258, 1447, ISO 8736, 8737 (DIN 7977, 7978).
Recommendation:
The pre-drilled hole is best produced using a straight shank taper pin drill No. 116310.