{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High-precision countersink 90° TiN 40 mm GARANT
Article no.: 150396 40
Article code:
- Countersink tip angle: 90
- Tool material: HSS
- Number of cutting edges Z: 3
- Standard: DIN 335 D
- Shank: Morse taper
Product details
Technical Data
| External ⌀ | 40 mm | |
| Coating | TiN | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 335 D | |
| Shank | Morse taper | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 10 mm | |
| Overall length L | 140 mm | |
| Morse taper MT | 3 | |
| Feed f in steel < 500 N/mm2 | 0,25 mm/rev. | |
| Colour ring | without | |
| Pre-drill ⌀ | 10 mm | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150396 40 | |
| EAN / GTIN | 4045197087041 | |
| Manufacturer number | 150396 40 |
Application Table
N
25
P
34
P
32
P
32
N
80
Description
Version:
Countersinks radially relief ground. Chip flutes are ground from solid up to size 31. Chip angle varies with the countersink ⌀ for optimum chip formation. Countersink point and circumference are relief ground and cut easily.
High-precision countersink for considerable performance improvement.
High-precision countersink for considerable performance improvement.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
High-precision countersink 90° TiN 40 mm GARANT
on request
In stock
136 pieces in stock
165,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
45 pieces in stock
112,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
115 pieces in stock
78,89 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
48 pieces in stock
106,49 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 3 | 3 | 3 | 3 |
| Countersink tip angle | 90 | 90 | 90 | 60 |
| Standard | DIN 335 D | DIN 335 D | DIN 335 D | DIN 334 |
| Shank | Morse taper | Morse taper | Morse taper | Morse taper |
| Morse taper MT | 3 | 3 | 3 | 3 |
| Feed f in steel < 500 N/mm2 | 0,25 | 0,25 | 0,25 | 0,25 |
| Type of product | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink |