{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Countersink 90° 63 mm HOLEX
Article no.: 150395 63
Article code:
- Countersink tip angle: 90
- Tool material: HSS
- Number of cutting edges Z: 3
- Standard: DIN 335 D
- Shank: Morse taper
Product details
Technical Data
| External ⌀ | 63 mm | |
| Coating | uncoated | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 335 D | |
| Shank | Morse taper | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 16 mm | |
| Overall length L | 180 mm | |
| Morse taper MT | 4 | |
| Feed f in steel < 500 N/mm2 | 0,35 mm/rev. | |
| Colour ring | without | |
| Pre-drill ⌀ | 16 mm | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150395 63 | |
| EAN / GTIN | 4045197086983 | |
| Manufacturer number | 150395 63 |
Application Table
N
70
N
33
P
28
P
27
P
27
Description
Version:
Countersinks radially relief ground. Chip flutes are ground from solid up to size 31. Chip angle varies with the countersink ⌀ for optimum chip formation. Countersink point and circumference are relief ground and cut easily.
Economy countersink version.
Economy countersink version.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Countersink 90° 63 mm HOLEX
on request
In stock
85 pieces in stock
165,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
39 pieces in stock
232,30 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
340,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
271,40 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| External ⌀ | 63 | 63 | 63 | 63 |
| Coating | uncoated | uncoated | TiN | uncoated |
| Overall length L | 180 | 180 | 180 | 190 |
| Through-coolant | no | no | no | no |
| smallest countersink ⌀ for holes from | 16 | 16 | 16 | 20 |
| Feed f in steel < 500 N/mm2 | 0,35 | 0,35 | 0,35 | 0,35 |
| Type of product | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink |