{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master TM plain shank thread mill with countersink 2×D, AlTiN, MF: 12X1,5
Article no.: 139686 12X1,5
Article code:
- Thread type: MF; MF-LH
- Flank angle: 60
- Tool material: Solid carbide
- Thread standard: DIN 13
- Shank: DIN 6535 HA to h6
Product details
Technical Data
| Thread size | M12×1.5 | |
| Coating | AlTiN | |
| Thread type | MF; MF-LH | |
| Flank angle | 60 degrees | |
| Tool material | Solid carbide | |
| Thread standard | DIN 13 | |
| Shank | DIN 6535 HA to h6 | |
| Thread pitch | 1,5 mm | |
| Nominal ⌀ DC | 10 mm | |
| Flute length Lc | 24,75 mm | |
| Shank length Ls | 52 mm | |
| Overall length L | 94 mm | |
| Shank ⌀ Ds | 14 mm | |
| Neck ⌀ D1 | 13 mm | |
| Programming value for countersink L1 | 26 mm | |
| Through-coolant | yes | |
| No. of teeth Z | 6 | |
| Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | |
| Spacing of the cutters | unequal spacing | |
| Countersink angle | 90 degrees | |
| Feed fz in steel < 750 N/mm2 | 0,09 mm | |
| Thread profile | Full profile | |
| Number of clamping slots | 6 | |
| Colour ring | green | |
| Internal/external application | Internal | |
| Thread depth | 24,75 mm | |
| Series | Master TM | |
| Type of product | thread milling cutter |
Identification numbers & Classifications
| Article number | 139686 12X1,5 | |
| EAN / GTIN | 4067263128793 | |
| Manufacturer number | 139686 12X1,5 |
Application Table
N
220
N
220
N
180
P
140
P
130
P
120
P
90
P
80
H
45
H
85
H
50
M
82
M
75
S
50
K
120
N
200
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- The latest generation of AlTiN-based HiPIMS coating.
- Corrected thread profile for avoidance of profile distortions.
Advantage:
Incorporating a countersink profile for a 90° countersink and thread milling in a single operation.