{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Tap SteelHT machine tap HSS-E-PM Form C 6GX M10
Article no.: 135374 M10
Article code:
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: DIN 371
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M10 | |
| Coating | TiAlN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 371 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 3X 6GX | |
| Taper lead form | C | |
| Helix angle | 40 degrees | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1,5 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank square □ | 8 mm | |
| Tapping hole ⌀ | 8,5 mm | |
| Thread ⌀ | 10 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | red | |
| Series | Master Tap | |
| Number of cutting edges Z | 3 | |
| Thread depth | 25 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 135374 M10 | |
| EAN / GTIN | 4062406237042 | |
| Manufacturer number | 135374 M10 |
Application Table
P
30
P
20
P
15
P
12
H
5
H
15
H
5
M
7
S
5
Description
Version:
High-performance tap, specially developed for use in steels with high tensile strength and for difficult-to-machine materials. Sturdy design with optimised guide thread to avoid chips jamming.
Tolerance class: ISO 3X/6GX.
- HSS-E-PM tool material – for very high cutting edge stability.
- Optimised honed cutting edges.
- TiAlN coating – for maximum wear protection.
Tolerance class: ISO 3X/6GX.
Application:
For components which are galvanised or shrink slightly when hardened.
Recommendation:
For TOOLOX and HARDOX materials we recommend deviating from the DIN data (see table) by selecting a larger tapping hole ⌀.
Note:
For TOOLOX and HARDOX materials: do not exceed the maximum thread depth 2×D!