{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap for cast iron TiCN M3 GARANT
Article no.: 132550 M3
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Nitrided surface − cast iron material behaves like an abrasive and would heavily abrade taps which are not nitrided.
Click to enlarge image
Click to enlarge image
- Thread type: M
- Flank angle: 60
- Tool material: HSS E
- Standard: DIN 371
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M3 | |
| Coating | TiCN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E | |
| Standard | DIN 371 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | C | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for blind holes; up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0,5 mm | |
| Overall length L | 56 mm | |
| Shank ⌀ Ds | 3,5 mm | |
| Shank square □ | 2,7 mm | |
| Tapping hole ⌀ | 2,5 mm | |
| Thread ⌀ | 3 mm | |
| Type of threading tool | Maskinsnittapper til dynamisk bearbejdning | |
| Number of clamping slots | 3 | |
| Colour ring | white | |
| Number of cutting edges Z | 3 | |
| Thread depth | 9 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 132550 M3 | |
| EAN / GTIN | 4045197071873 | |
| Manufacturer number | 132550 M3 |
Application Table
K
16
K
14
Description
Version:
With straight flutes and short chamfer lead (2 − 3 turns).
Advantage:
- Improved wear properties due to hard coating.
- Higher cutting speeds due to reduction of thermal load on cutting edges.
- Dry machining possible on cast iron − cooling lubricant not necessary.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
|
Machine tap for cast iron TiCN M3 GARANT
on request
In stock
22 pieces in stock
34,73 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
41 pieces in stock
19,44 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
45,66 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
66 pieces in stock
59,11 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Type of threading tool | Maskinsnittapper til dynamisk bearbejdning | Machine tap for dynamic machining | Machine tap for dynamic machining | Machine tap for dynamic machining |
| Coating | TiCN | nitrided | nitrided | TiCN |
| Overall length L | 56 mm | 56 mm | 56 mm | 56 mm |
| Tapping hole ⌀ | 2,5 mm | 2,5 mm | 2,5 mm | 2,5 mm |
| Standard | DIN 371 | DIN 371 | DIN 371 | DIN 371 |
| Tool material | HSS E | HSS E | HSS E PM | HSS E PM |
| Application for type of drilling | up to 3×D for blind holes; up to 3×D for through holes | up to 3×D for blind holes; up to 3×D for through holes | up to 2×D for blind holes | up to 2×D for blind holes |