{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Through hole machine tap with interrupted thread M4 GARANT
Article no.: 131650 M4
Article code:
- Thread type: M
- Flank angle: 60
- Tool material: HSS E
- Standard: DIN 371
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M4 | |
| Coating | uncoated | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E | |
| Standard | DIN 371 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2 6H | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0,7 mm | |
| Overall length L | 63 mm | |
| Shank ⌀ Ds | 4,5 mm | |
| Shank square □ | 3,4 mm | |
| Tapping hole ⌀ | 3,3 mm | |
| Thread ⌀ | 4 mm | |
| Type of threading tool | Machine tap for conventional machining | |
| Number of clamping slots | 3 | |
| Colour ring | without | |
| Number of cutting edges Z | 3 | |
| Thread depth | 12 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 131650 M4 | |
| EAN / GTIN | 4045197069917 | |
| Manufacturer number | 131650 M4 |
Application Table
N
13
P
15
P
15
K
9
Description
Version:
Spiral point.
With interrupted thread, this reduces torque and improves distribution of the lubricant.
With interrupted thread, this reduces torque and improves distribution of the lubricant.
Advantage:
Ideally suited for use on resilient materials and thin-walled components. Low frictional resistance, thus no material deformation is caused.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Through hole machine tap with interrupted thread M4 GARANT
on request
In stock
286 pieces in stock
23,23 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4.253 pieces in stock
16,62 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Taper lead form | B | B |
| Number of cutting edges Z | 3 | 3 |
| Coating | uncoated | uncoated |
| Colour ring | without | without |
| Thread type | M | M |
| Tool material | HSS E | HSS E |
| Application for type of drilling | up to 3×D for through holes | up to 3×D for through holes |