{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide drill plain shank DIN 6535 HA TiAlN 2,6 mm GARANT
Article no.: 122659 2,6
Article code:
Click to enlarge image
Plain shank DIN 6535 HA
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Norm: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: m6
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 2,6 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Norm | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | m6 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 17,1 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 21 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 4 mm | |
| Shank tolerance | h6 | |
| Feed f in stainless steel > 900 N/mm2 | 0,05 mm/rev. | |
| Colour ring | blue | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122659 2,6 | |
| EAN / GTIN | 4045197582423 | |
| Manufacturer number | 122659 2,6 |
Application Table
P
170
P
140
P
130
P
110
P
70
M
90
M
80
K
95
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole, thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from ⌀ 3.8 mm. Up to 3.7 mm ⌀ with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips, even on long chipping materials.
Attention:
Sizes ending with X = cutter ⌀ tolerance h7.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
|
Solid carbide drill plain shank DIN 6535 HA TiAlN 2,6 mm GARANT
on request
In stock
104 pieces in stock
100,51 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
233 pieces in stock
51,52 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
104,42 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
99,59 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Semi-Standard | yes | yes | yes | yes |
| Number of cutting edges Z | 2 | 2 | 2 | 2 |
| Version | 6×D | 6×D | 6×D | 6×D |
| Nominal ⌀ DC | 2,6 | 2,6 | 2,6 | 2,6 |
| Point angle | 140 | 140 | 140 | 140 |
| Tolerance nominal ⌀ | m6 | h7 | h7 | m7 |
| recommended maximum drilling depth L2 | 17,1 | 17,1 | 17,1 | 18,1 |