{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Diabolo solid carbide HPC drill, plain shank DIN 6535 HA 11,8 mm
Article no.: 122641 11,8
Article code:
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Type: H
- Tolerance nominal ⌀: h7
Product details
Technical Data
| Series | Diabolo | |
| Nominal ⌀ DC | 11,8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Type | H | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 53,3 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 71 mm | |
| Overall length L | 118 mm | |
| Shank ⌀ Ds | 12 mm | |
| Feed f in steel < 60 HRC | 0,11 mm/rev. | |
| Colour ring | red | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122641 11,8 | |
| EAN / GTIN | 4045197969705 | |
| Manufacturer number | 122641 11,8 |
Application Table
P
90
P
80
P
70
P
65
P
55
H
28
H
16
H
14
H
10
K
70
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Convex major cutting edges with defined honed edge ensure the drill has high stability and maximum load capacity.
Special multi-nano layer coating for drilling in hardened steels.
Special multi-nano layer coating for drilling in hardened steels.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Diabolo solid carbide HPC drill, plain shank DIN 6535 HA 11,8 mm
on request
In stock
22 pieces in stock
147,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
172,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
125 pieces in stock
63,71 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Version | 6×D | 6×D | 6×D |
| Colour ring | red | green | green |
| Overall length L | 118 mm | 118 mm | 118 mm |
| Through-coolant | no | no | no |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm |
| Type of product | Jobber drill | Jobber drill | Jobber drill |