{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide drill plain shank DIN 6535 HA 180° 7,2 mm
Article no.: 122506 7,2
Article code:
Click to enlarge image
Plain shank DIN 6535 HA
Click to enlarge image
Click to enlarge image
With cutting edge chamfer (= 5% of the nominal ⌀)
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Version: 3×D
- Tolerance nominal ⌀: m7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 7,2 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 3×D | |
| Tolerance nominal ⌀ | m7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 180 degrees | |
| recommended maximum drilling depth L2 | 30,2 mm | |
| Shank | DIN 6535 HA to h6 | |
| Use for drilling | limited convexity; limited cross-drilling; limited oblique spot drilling | |
| Through-coolant | yes, with 25 bar | |
| Pilot drill required | yes, pilot drill | |
| Semi-Standard | yes | |
| Flute length Lc | 41 mm | |
| Overall length L | 79 mm | |
| Shank ⌀ Ds | 8 mm | |
| Shank tolerance | h6 | |
| Feed f in steel < 900 N/mm2 | 0,12 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122506 7,2 | |
| EAN / GTIN | 4045197744159 | |
| Manufacturer number | 122506 7,2 |
Application Table
P
85
P
75
P
60
P
50
M
45
K
90
Description
Version:
Special point geometry for generating 180° flat-bottomed holes. Low radial forces even when spot drilling on faces with up to 45° slope. Flute geometry for optimum chip evacuation. With 4 guide chamfers to stabilise the drill in the hole.
Advantage:
The 180° point angle permits drilling and counterboring in a single operation.
Recommendation:
When using the solid carbide 180° drill it is absolutely essential for process reliability:
- when spot drilling on flat surfaces to drill a pilot hole 1×D using pilot drill No. 122736.
- when spot drilling on sloping surfaces up to 15° : reduce the feed rate f to 50 %, up to 30°: reduce the feed rate f to 40 % and up to 45°: reduce the feed rate f to 25 % of the stated value. After spot drilling, the normal feed rate value can be used.
Note:
Flute length LC = L2 + 1.5 × DC.
Form HB and HE supplied at the same price as HA.
Form HB: order with No. 122506 + 129100HB .
Form HE: order with No. 122506 + 129100HE.
180° solid carbide drills for machining aluminium available on request.
Not suitable for generating counterbores for socket-head screws to DIN974-1.
Form HB and HE supplied at the same price as HA.
Form HB: order with No. 122506 + 129100HB .
Form HE: order with No. 122506 + 129100HE.
180° solid carbide drills for machining aluminium available on request.
Not suitable for generating counterbores for socket-head screws to DIN974-1.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
|
Solid carbide drill plain shank DIN 6535 HA 180° 7,2 mm
on request
Unknown
0 pieces in stock
122,48 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
71,30 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
71,30 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
142,03 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Semi-Standard | yes | yes | yes | yes |
| Overall length L | 79 | 79 | 79 | 91 |
| Through-coolant | yes, with 25 bar | yes, with 25 bar | yes, with 25 bar | yes, with 25 bar |
| Shank tolerance | h6 | h6 | h6 | h6 |
| Tolerance nominal ⌀ | m7 | h7 | h7 | m7 |
| Flute length Lc | 41 | 41 | 41 | 53 |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill |