{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
Solid carbide drill Weldon shank DIN 6535 HB TiAlN 12 mm GARANT
Article no.: 122505 12
Article code:
Click to enlarge image
Weldon shank DIN 6535 HB
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: DIN 6537 K
- Version: 4×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 K | |
| Version | 4×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 37 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Flute length Lc | 55 mm | |
| Overall length L | 102 mm | |
| Shank ⌀ Ds | 12 mm | |
| Shank tolerance | h6 | |
| Feed f in steel < 1100 N/mm2 | 0,32 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122505 12 | |
| Manufacturer number | 122505 12 |
Application Table
P
120
P
100
P
85
P
65
P
35
M
30
S
35
K
70
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Convex cutting edges with honed edges and special flute profile for short chips, even on long chipping materials.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
|
Solid carbide drill Weldon shank DIN 6535 HB TiAlN 12 mm GARANT |
on request
In stock
38 pieces in stock
123,63 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
64 pieces in stock
85,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
200,10 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 | 2 |
| Coating | TiAlN | TiN | TiAlN | TiAlN |
| Colour ring | green | green | green | red |
| Through-coolant | yes, with 25 bar | yes, with 25 bar | yes, to 25 bar | yes, with 25 bar |
| Nominal ⌀ DC | 12 mm | 12 mm | 12 mm | 12 mm |
| Point angle | 140 degrees | 140 degrees | 140 degrees | 140 degrees |
| recommended maximum drilling depth L2 | 37 mm | 37 mm | 37 mm | 37 mm |