{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro Steel solid carbide drill, plain shank DIN 6535 HA, TiAlN, ⌀ DC h7 (mm or inch): 16,2
Article no.: 122504 16,2
Article code:
Click to enlarge image
Plain shank DIN 6535 HA
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: DIN 6537 K
- Version: 4×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Series | Pro Steel | |
| Nominal ⌀ DC | 16,2 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 K | |
| Version | 4×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 48,7 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 73 mm | |
| Overall length L | 123 mm | |
| Shank ⌀ Ds | 18 mm | |
| Feed f in steel < 900 N/mm2 | 0,28 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122504 16,2 | |
| EAN / GTIN | 4045197826718 | |
| Manufacturer number | 122504 16,2 |
Application Table
N
250
N
200
N
160
P
125
P
115
P
95
P
90
P
65
M
35
M
30
K
100
K
65
Description
Version:
Straight major cutting edges and a special flute profile ensure good chip evacuation. The robust cutter geometry ensures high-performance drilling with good process reliability.
A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating.
Up to ⌀ 1.9 with 4 facets, from ⌀ 2 with relieved cone.
A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating.
Up to ⌀ 1.9 with 4 facets, from ⌀ 2 with relieved cone.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
|
HOLEX Pro Steel solid carbide drill, plain shank DIN 6535 HA, TiAlN, ⌀ DC h7 (mm or inch): 16,2
on request
Subsequent delivery
0 pieces in stock
202,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
423,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
423,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
202,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
202,40 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | green | green | green | green | green |
| Overall length L | 123 mm | 123 mm | 123 mm | 123 mm | 123 mm |
| Through-coolant | yes, with 25 bar | yes, with 25 bar | Yes, with 25 bar | yes, to 25 bar | yes, with 25 bar |
| Nominal ⌀ DC | 16,2 mm | 16,2 mm | 16,2 mm | 16,2 mm | 16,2 mm |
| Tolerance nominal ⌀ | h7 | h7 | h7 | h7 | h7 |
| Machining strategy | HPC | HPC | HPC | HPC | HPC |
| Series | Pro Steel | Master Steel | Master Steel | Pro Steel | Pro Steel |