{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro INOX solid carbide high-performance drill, plain shank DIN 6535 HA 9,1 mm
Article no.: 122390 9,1
Article code:
- Tool material: Solid carbide
- Standard: DIN 6537 K
- Version: 4×D
- Tolerance nominal ⌀: m7
- Number of cutting edges Z: 2
Product details
Technical Data
| Series | Pro Inox | |
| Nominal ⌀ DC | 9,1 mm | |
| Coating | AlTiN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 K | |
| Version | 4×D | |
| Tolerance nominal ⌀ | m7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 33,4 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 47 mm | |
| Overall length L | 89 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed f in stainless steel < 900 N/mm2 | 0,11 mm/rev. | |
| Colour ring | blue | |
| Type of product | Twist Drill |
Identification numbers & Classifications
| Article number | 122390 9,1 | |
| EAN / GTIN | 4067263003410 | |
| Manufacturer number | 122390 9,1 |
Application Table
N
140
N
120
P
80
P
75
P
65
M
35
M
30
Description
Version:
Efficient drilling especially for use in stainless and acid-resistant steels.
Straight main cutting edges with optimised cutting edge design for improved chip breaking behaviour. Enlarged flutes for excellent chip evacuation. Increased wear resistance due to improved carbide substrate and high temperature resistant coating.
Straight main cutting edges with optimised cutting edge design for improved chip breaking behaviour. Enlarged flutes for excellent chip evacuation. Increased wear resistance due to improved carbide substrate and high temperature resistant coating.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
HOLEX Pro INOX solid carbide high-performance drill, plain shank DIN 6535 HA 9,1 mm
on request
In stock
57 pieces in stock
34,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
49,34 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
66,93 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
37,03 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Version | 4×D | 4×D | 4×D | 4×D |
| Colour ring | blue | without | green | green |
| Overall length L | 89 mm | 89 mm | 89 mm | 89 mm |
| Through-coolant | no | no | no | no |
| Tool material | Solid carbide | Solid carbide | solid carbide | Solid carbide |
| Tolerance nominal ⌀ | m7 | h7 | h7 | h7 |
| recommended maximum drilling depth L2 | 33,4 mm | 33,4 mm | 33,4 mm | 33,4 mm |