{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide jobber drill, TiAlN, ⌀ DC h7: 9mm
Article no.: 122251 9
Article code:
- Tool material: solid carbide
- Standard: DIN 338
- Type: N
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 9 mm | |
| Coating | TiAlN | |
| Tool material | solid carbide | |
| Standard | DIN 338 | |
| Type | N | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 118 degrees | |
| recommended maximum drilling depth L2 | 67,5 mm | |
| Helix angle | 30 degrees | |
| Shank | Parallel shank to h7 | |
| Through-coolant | no | |
| Flute length Lc | 81 mm | |
| Overall length L | 125 mm | |
| Shank ⌀ Ds | 9 mm | |
| Shank tolerance | h7 | |
| Feed f in steel < 1100 N/mm2 | 0,14 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122251 9 | |
| EAN / GTIN | 4045197749598 | |
| Manufacturer number | 122251 9 |
Application Table
N
260
N
180
N
180
P
90
P
90
P
80
P
60
P
35
M
35
M
25
S
25
K
90
N
180
Description
Version:
Similar to DIN 338.
Nominal ⌀ and shank ⌀ equal.
TiAlN coating for even better performance.
Nominal ⌀ and shank ⌀ equal.
TiAlN coating for even better performance.
Note:
Flute length LC = L2 + 1.5 × DC.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide jobber drill, TiAlN, ⌀ DC h7: 9mm
on request
In stock
60 pieces in stock
112,24 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
110 pieces in stock
76,13 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
92,46 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | uncoated | TiN |
| Standard | DIN 338 | DIN 338 | DIN 338 |
| Shank | Parallel shank to h7 | Parallel shank to h7 | Parallel shank to h7 |
| Tolerance nominal ⌀ | h7 | h7 | h7 |
| Shank ⌀ Ds | 9 mm | 9 mm | 9 mm |
| Feed f in steel < 1100 N/mm2 | 0,14 mm/rev. | 0,14 mm/rev. | 0,14 mm/rev. |
| Type of product | Jobber drill | Jobber drill | Jobber drill |