{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 3,2 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6539 | |
Type | N | |
Tolerance nominal ⌀ | h7 | |
Number of cutting edges Z | 2 | |
Point angle | 118 degrees | |
recommended maximum drilling depth L2 | 13,2 mm | |
Helix angle | 30 degrees | |
Shank | Parallel shank to h7 | |
Through-coolant | no | |
Flute length Lc | 18 mm | |
Overall length L | 49 mm | |
Shank ⌀ Ds | 3,2 mm | |
Shank tolerance | h7 | |
Feed f in steel < 1100 N/mm2 | 0,08 mm/rev. | |
Colour ring | without | |
Type of product | Jobber drill |
Article number | 122100 3,2 | |
EAN / GTIN | 4045197039330 | |
Manufacturer number | 122100 3,2 |
This article |
Recommendations |
||
---|---|---|---|
Solid carbide jobber drill extra stub 3,2 mm GARANT
on request
In stock
554 pieces in stock
11,21 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
262 pieces in stock
12,42 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
149 pieces in stock
18,40 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 | 2 |
Nominal ⌀ DC | 3,2 mm | 3,2 mm | 3,2 mm |
Helix angle | 30 degrees | 30 degrees | 30 degrees |
Type | N | N | N |
Flute length Lc | 18 mm | 18 mm | 18 mm |
Shank ⌀ Ds | 3,2 mm | 3,2 mm | 3,2 mm |
Feed f in steel < 1100 N/mm2 | 0,08 mm/rev. | 0,08 mm/rev. | 0,08 mm/rev. |